A running toilet can be a frustrating and wasteful problem to deal with. Not only does it waste water, but it can also lead to higher water bills. Fortunately, repairing a running toilet is a relatively simple task that can be done by anyone with basic DIY skills. In this article, we will guide you through the steps to fix a running toilet and restore it to proper working condition.

1. Identify the problem: The first step in repairing a running toilet is to identify the cause of the problem. There are several common issues that can cause a toilet to run continuously, such as a faulty flapper valve, a worn-out fill valve, or a loose chain.

2. Replace the flapper valve: If the flapper valve is the culprit, it may be worn out or not sealing properly. To replace it, turn off the water supply to the toilet, flush to drain the tank, and remove the old flapper valve. Install a new flapper valve according to the manufacturer’s instructions, ensuring a tight seal.

3. Adjust the fill valve: A worn-out fill valve can also cause a toilet to run continuously. To fix this, turn off the water supply, flush the toilet, and remove the tank lid.

4. Check the chain: A loose or tangled chain can prevent the flapper valve from closing properly, causing the toilet to run. Adjust the chain length so that there is a slight slack when the flapper valve is closed. This will allow it to open and close smoothly.

Repairing a running toilet is a simple task that can save you money on water bills and prevent wastage. By following the steps outlined in this article, you can easily identify and fix the problem causing your toilet to run continuously. Remember to turn off the water supply before making any repairs and consult a professional if you are unsure or uncomfortable with DIY repairs. With a little effort, you can have your toilet working properly again in no time.